Yedoo OOPS AMBULANCE, Руководство пользователя

Страница: 12 / 96

Safety measures
The balance bike in its basic equipment is designed for riding
during daylight in areas meant for sport and recreation. For
roads with car traff ic or for riding in the dark, you need to
provide your balance bike with safety features (lights, reflectors,
etc.) in accordance with the regulations valid in your country.
Make sure the children obey general safety regulations or
traff ic rules and that they use use protective accessories
(helmets, knee and elbow pads, good shoes, etc.)
Before each ride, always check good function of the brakes
and the overall technical condition of the balance bike. Do not
exceed the maximum loading capacity of the balance bike
(as specified on the front side). The balance bike is designed
for one rider only! Do not overload the balance bike, it is not
intended for jumping or acrobatic riding.
Balance bikes (YooToo, TooToo) have headsets with integrated
backstops, which prevent the handlebars from turning around.
Therefore, do not turn the handlebars by force to avoid damage
to the backstops. Always have the backstops repaired in
a specialized cycle repair centre.
All the speed-limiting mechanisms (brake pads or discs, rims,
and tires etc.) can become warm when used. For this reason,
it is not recommendable to touch them before cooling off !
Riding instructions
Children can use the balance bike only under the supervision
of an adult. It is important that the child always grips the
handles with both hands at when riding. While seated and
balancing, the child pushes off alternating the feet as when
running or walking fast.
Warning: Children can develop
a considerable speed, so they should be properly instructed
about the possible dangers and braking methods by the parent
or the responsible adult. For braking, the child should squeeze
the brake lever on the handlebar or should use soles of his/her
shoes to slow down by puting them to the ground.
Warning:
sudden violent braking may cause injury.
Maintenance
Correct and regular maintenance increases safety and
lengthens the life span of the balance bike. Regularly inspect
screw connections, quick releases, pressure in tires and
lubricate the moveable parts (wheels, bearings, handlebars
bearings, cables, brake parts etc.).
Make sure that no lubricant gets on the rims or brake pads.
Grease reduces their eff ect! If this situation occurs, it is
necessary to remove the grease from all the parts, using
a solvent and/or degreaser. Inspect the tires for cuts, nicks
and deformities. Replace tires that show excessive wear and
damage with an equivalent tire.
Inspect the self-locking nuts. If they get loose freely, exchange
them with new ones.
Check the spokes for defects. Irregular strain or looseness
in spokes can cause their cracking or can make the wheel
wobble.
Keep the balance bike clean, use soft cloth moistened with
water. It should be stored inside, on a dry and shaded place.
Do not expose the balance bike to high humidity or extreme
temperatures over a long period of time. Before the winter,
prepare it against corrosion. The producer does not cover
damage caused solely by neglected maintenance, non-
adequate adaptation, or inappropriate treatment and storage.
The product complies with the corresponding EU standards
(ČSN EN 71-1, ČSN EN 71-3) and received quality and safely
certifications from a leading Czech testing lab – Engineering
Test Institute (Strojírenský zkušební ústav, s.p.).
Producer: INTREA – PIKO, s. r. o., Sasanková 2657/2, 106 00
Prague 10, Czech Republic, www.yedoo.eu.
Warranty list
General regulations
The content, extend and duration of the warranty conforms to
the valid legal code in the respective country of the purchase
of the balance bike.
Warranty period
The buyer of the new Yedoo balance bike (product) can
apply the warranty during the period of 36 months from the
purchase. The warranty commences on the day of the sale to
the end user and is automatically extended when the product
is taken into repair during warranty period.
Warranty application
The warranty must be filled out with the retailer, where
the product was purchased (see bellow). When applying
the warranty, we recommend presenting the filled out sheet
bellow, the receipt and a complete and cleaned product. The
seller will give a written confirmation to the buyer regarding
the acceptance of the product into the warranty process.
Warranty conditions
The product must be assembled following the instructions of
the manual. The products shall only be used for the purposes,
which it was designed for. The product must be stored and
maintained in the ways in accordance with the Instruction
manual. The warranty does not cover damage caused by
common wear and tear is not covered by this warranty.
The producer does not cover damage caused by incorrect
assembly or by use in contradiction with the Instruction
manual.
Product model:
Serial number of the frame:
Date of purchase:
Retailer:
Signature and stamp:
EN
12