Yealink ZVC Series, Руководство по развертыванию

Страница: 28 / 40

| Using CP960 as Zoom Rooms Controller |
28
5.
If the
Lock Settings
is enabled, enter the room passcode.
6. Long tap the corresponding preset and then select Save position .
Resetting the Preset Position for UVC30
Procedure
1.
During a meeting, tap
Camera Control
.
2.
Tap / to zoom camera out/in.
3. Tap the arrow keys to pan/tilt the camera.
4.
Long tap
Preset1
/
Preset2
/
Preset3
to reset the preset.
5. If the Lock Settings is enabled, enter the room passcode.
6.
Long tap the corresponding preset and then select
Save position
.
Renaming the Preset Position for UVC30
Procedure
1.
During a meeting, tap
Camera Control
.
2. Long tap Preset1 / Preset2 / Preset3 to rename the preset.
3.
If the
Lock Settings
is enabled, enter the room passcode.
4. Long tap the corresponding preset and then select Rename .
5.
Enter the new name.
6. Tap OK .
Setting UVC30 Camera to Preset Position
Procedure
1. During a meeting, tap Camera Control .
2.
Select
Preset1
/
Preset2
/
Preset3
to set the camera to the preset position.
Enabling/Disabling Auto-framing for UVC30
Auto-framing is mainly based on face detection, which provides real-time detection and position tracking on
all faces in the conference room. All participants in the output screen are covered and the camera can be
automatically adjusted according to the number of participants and the position changes.
About this task
When the auto-framing feature is enabled, you can not control the UVC30 camera position.
Procedure
1.
During a meeting, tap
Camera Control
.
2. Enable/Disable Auto-framing .