Yealink Zoom Rooms CP960-UVC, Руководство по развертыванию

Страница: 27 / 41

| Content Sharing | 27
Procedure
1. During a meeting, tap Camera Control .
2. Select Preset1 / Preset2 / Preset3 to set the camera to the preset position.
Enabling/Disabling Auto-framing for UVC30
Auto-framing is mainly based on face detection, which provides real-time detection and position tracking on all faces
in the conference room. All participants in the output screen are covered and the camera can be automatically adjusted
according to the number of participants and the position changes.
About this task
When the auto-framing feature is enabled, you can not control the UVC30 camera position.
Procedure
1. During a meeting, tap Camera Control .
2. Enable/Disable Auto-framing .
Content Sharing
You can present the content while the device is idle or during a meeting.
•
Wired Content Sharing
• Wireless Content Sharing
• Stopping Sharing Content
Wired Content Sharing
After the MShare is connected to the PC, you can use MShare for wired content sharing.
Procedure
Normally, it will start presentation automatically. If you stop content sharing manually on the touch screen, do one
of the following:
• From the idle screen, tap Presentation to start content sharing.
• During a meeting, tap Share Content or Camera > Start sharing to start content sharing with the
participants.