Basic Call Features
85
To set up a network conference call:
1.
Place a call to the first party.
2.
Press the
Conf
soft key to create a new call.
The active call is placed on hold.
3.
Enter the number of the second party and press , , or the
Send
soft key.
4.
When the second party answers the call, press the
Conf
soft key to add the second
party to the conference.
5.
Press the
Conf
soft key to create a new call.
The conference is placed on hold.
6.
Enter the number of the new party and then press , , or the
Send
soft
key.
7.
When the new party answers the call, press the
Conf
soft key to add the new party
to the conference.
8.
Repeat steps 5 to 7 until you have added all intended parties.
The procedures to set up a network conference call for specific servers may be
different from introduced above. Contact your system administrator for more
information.
Call Park
You can use call park feature to place a call on hold, and then retrieve the call from
another phone in the system (for example, a phone in another office or conference
room). You can park an active call by pressing the call park key on the phone. If the
call is parked successfully, the response is either a voice prompt confirming that the call
was parked, or a visible indication on the LCD screen. When the call is parked
successfully, someone can retrieve the parked call on another phone.
Note
To configure a call park key via phone user interface:
1.
Press
Menu
->
Features
->
DSS Keys
.
2.
Select the desired DSS key.
3.
Press or , or the
Switch
soft key to select
Key Event
from the
Type
field.
4.
Press or , or the
Switch
soft key to select
Call Park
from the
Key Type
field.
5.
Press or , or the
Switch
soft key to select the desired line from the
Account
ID
field.
Call Park feature is not available on all servers. Contact your system administrator for
more information.
