Yealink Yealink SIP-T22P Скачать руководство пользователя страница 95

Страница: 95 / 146

Basic Call Features

forward was enabled for a specific account, do the following:

1) Press or to select the No Answer field.

2) Press the All Lines soft key.

The LCD screen prompts “Copy to All Lines?”.

3) Press the OK soft key to accept the change or the Cancel soft key to cancel.

Press the Save soft key to accept the change or the Back soft key to cancel.

The icon appears on the idle screen and the associate line icon changes to .

Call forward is configurable via web user interface at the path Features->Forward &
DND.

Note

To disable call forward in phone mode:

Do one of the following:

Press when the phone is idle.

Press Menu->Features->Call Forward.

Press or to select the desired forwarding type, then press the Enter soft
key.

Press , , or the Switch soft key to

select Disable to disable the call forward.

Press the Save soft key to accept the change.

To disable call forward in custom mode for a specific account:

Press Menu->Features->Call Forward or press when the phone is idle.

Press or to select the desired account, then press the Enter soft key.

Press or to select the desired forwarding type, then press the Enter soft
key.

Press , or the Switch soft key to

select Disable to disable the call forward.

Press the Save soft key to accept the change.

You can also enter the SIP URL or IP address in the Forward To field. For more information

on using the SIP URL or IP address, refer to

Placing Calls

on page

Call forward is local to the phone, and may be overridden by the server settings. Call
forward on code or off code may be different between servers. For more information,

contact your system administrator.

Содержание Yealink SIP-T22P



















































































































































Результаты поиска

Содержание Yealink SIP-T22P

Отзывы:

Бренды по названию

Популярные бренды

Yealink Yealink SIP-T22P, Руководство пользователя

Результаты поиска

Содержание Yealink SIP-T22P

Отзывы:

Бренды по названию

Популярные бренды