Yealink W52, Руководство пользователя

Страница: 51 / 56

User Guide for the W52 Cordless Phone
51
Why doesn’t the power indicator on the base station light up?
Plug the supplied power adapter to W52 Cordless Phone, if the power indicator doesn’t light up, it should be a
hardware problem. Please contact your vendor or local distributor and send the problem description for help.
Why doesn’t the network indicator on the base station light up slowly flash?
It means that the W52 Cordless Phone cannot get an IP address. Try connecting the W52 Cordless Phone to
another switch port, if the network indicator still slowly flashes, please try a reset.
Why can I hear the verification tone from handset if the call is successfully handled by the repeater?
To deactivate the verification tone on the repeater:
1. Switch off the repeater (disconnect the power adapter).
2. Switch it on for 1 to 5 seconds and switch it off again.
3. Switch it on again. The LED indicator on the repeater flashes slowly.
4. Switch it off again.
5. Switch it on again.
The verification tone is then deactivated. If you want to activate the verification tone, repeat the above steps.
Why does paging fail?
• Check the current mode of the base station. If the base station is not in the paging
mode, press the paging key on the base station to enter the paging mode.
• Ensure that there is at least one handset registered to the base station.
Why can’t I turn the handset on?
Ensure the batteries are inserted into the handset. If the batteries are already inserted into the handset, place
the handset in the charger cradle.
Why do I hear some noise during a call?
• Ensure that you are not using the handset or base station in an area with high electrical interference.
You can reposition the handset and the base station to keep them far away from sources of high
electrical interference.
• Ensure that the handset is not too far from the base station.
• Restart the base station and place a call to see if there is still noise heard during the call.
Can I transfer an internal call to another party?
The phone does not support this feature. You can only transfer external calls from the phone.
TROUBLESHOOTING