Yealink VC Series, Руководство администратора

Страница: 50 / 180

Administrator‘s Guide for Yealink Video Conferencing Systems
40
Parameter Description Configuration Method
to implement the changes.
Packet
Interval(1-3600s)
Configures the interval (in
seconds) for the system to send
LLDP requests.
Default: 60
Note: If you change this
parameter, the system will reboot
to implement the changes.
Remote Control
Web User Interface
To configure LLDP via the web user interface:
1. Click on Network->Advanced.
2. In the LLDP block, select the desired value from the pull-down list of Active.
3. Enter the desired time interval in the Packet Interval (1-3600s) field.
4. Click Confirm to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
5. Click Confirm to reboot the system immediately.
To configure LLDP via the remote control:
1. Select Menu->Advanced (default default password: 0000) ->Advanced Network.
2. In the LLDP block, check the Active checkbox.
3. Enter the desired value in the Packet Interval (1-3600s) field.
4. Press the Save soft key to accept the change.
The display device prompts ―Reboot now?‖.
5. Select OK to reboot the system immediately.