Yealink VC Series, Руководство администратора, Страница: 27 / 180

Getting Started
17
This chapter provides basic information and installation instructions for Yealink VCS
systems in the following sections:

System Installation

Powering the System On and Off

System Initialization

System Startup

Setup Wizard

Placing a Test Call from the Yealink VCS System
Placing the System
Do not place the camera facing a window or other bright light. Ensure sufficient space to
connect the cables. Ensure all participants are facing both the display device and the
camera at the same time by putting camera and display device together.
System Components Installation
This section introduces the following:

Installing the VC400/VC120 video conferencing system

Mounting the camera on the TV

Mounting the camera on a wall

Installing batteries into the remote control

Connecting the CPE80 expansion microphone
Note
Up to two display devices can be connected to the VC400/VC120 codec. Because the
display device is not included in the package, you need to purchase it separately if
required. Ensure that the purchased display device supports HDMI input.
When connecting just one display device to the VC400/VC120 codec, Display1 port is the
only available port. If dual screen mode is required, you can connect another display
device to the Display2 port.
Because the DVI cable is tailor-made, please use the Yealink-supplied DVI cable.
To prevent shock damage, do not connect the power adapter and turn on the power
before connecting all system components.
connecting all system components.