Yealink VC Series, Руководство администратора

Страница: 101 / 180

Configuring System Settings
91
To configure the time and date format via the remote control:
1. Select Menu->Basic->Date & Time.
2. Configure the desired values.according to the need.
3. Press the Save soft key to accept the change.
The time and date displayed on the LCD screen of the display device and VCP40
phone will change accordingly.
The system will enter the sleep mode automatically when it has been inactive for a
period of time (the default time is 10 minutes). When the system is in sleep mode, it can
still accept incoming calls. The display device will prompt‖ No Signal‖, and the LCD
screen of the VCP40 phone prompts ―Sleeping Press any key to resume‖. You can press
any key on the remote control or the VCP40 phone to wake the system up. When
receiving a call, the system will be woken up automatically.
You can change the automatic sleep time via the remote control or web user interface.
You can also press the sleep key on the remote control to make the system sleep
immediately.
The automaticsleep time is described below:
Parameter Description Configuration Method
Automatic Sleep
Time
Configures the inactive time (in
minutes) before the system enter
sleep mode.
Default: 10 Min
Note: During setup wizard, the
automatic sleep time feature is
disabled automatically. To
protect the display device, you
should configure the automatic
sleep time immediately.
Remote Control
Web User Interface
To configure the automatic sleep time via the web user interface:
1. Click on Setting->General.