Yealink Telkom W52P, Руководство по настройке

Страница: 35 / 102

Basic Operations
23
To configure a static IPv4 address via CommPortal phone configurator:
1. Click on Network >IP Setting.
2. Select Static IP Address from the Internet Port Type for IPV4 pull-down list.
3. Enter the desired values in the Static IP Address, Subnet Mask, Gateway, Primary
DNS and Secondary DNS fields respectively.
4. Press the Save soft key to accept the change.
5. Perform auto provisioning on the phone to download above configurations. For
more information on how to perform auto provisioning, refer to
Downloading
Configuration Files on page 17 .
Note
SIP session timers T1, T2 and T4 are SIP transaction layer timers defined in RFC 3261.
These session timers are configurable on IP phones.
Timer T1
Timer T1 is an estimate of the Round Trip Time (RTT) of transactions between a SIP client
and SIP server.
Timer T2
Timer T2 represents the maximum retransmitting time of any SIP request message. The
re-transmitting and doubling of T1 will continue until the retransmitting time reaches the
T2 value.
Wrong network settings may result in inaccessibility of your phone and may also have an
impact on your network performance. For more information on these parameters,
contact your system administrator.