Yealink Telkom W52P, Руководство по настройке

Страница: 34 / 102

Yealink W52P IP DECT Phones Configuring Guide
22
indicates the handset is registered successfully.
After successful registration, an internal handset number and handset name appear on
the LCD screen.
To de-register a handset via the handset:
1. Press to enter the main menu.
2. Select ->Registration->De-reg. Handset.
3. Enter the system PIN (default: 0000).
4. Press the Done soft key.
The LCD screen displays the names of the handsets registered to the same base
station. The name of the handset itself is highlighted and followed by a left arrow.
5. Press or to highlight the desired handset name, and then press the OK
soft key.
The LCD screen prompts “De-register Handset”.
6. Press the Yes soft key to de-register the handset or the No soft key to cancel.
The handset can be registered to the base station automatically only if the handset is
registered to more than one base station. You can select Bestbase to search for the
base station with the best signal strength.
To select the base station via the handset:
1. Press to enter the main menu.
2. Select ->Registration->Select Base.
The LCD screen displays all base stations the handset registered to and the
Bestbase option. The radio box of the currently used base station is marked.
3. Press or to highlight the desired base station or the Bestbase option, and
then press the Select soft key.
The handset begins to search for base station. After successful connection, the
handset plays a warning tone and prompts “Base selected successfully!”.
You can highlight the base station the handset registered to, and then press the
Rename soft key to rename the base station name.
The base station attempts to contact a DHCP server in your network to obtain valid
network settings (e.g., IP address, subnet mask, gateway address and DNS address) by
default.
If the base station cannot contact a DHCP server for any reason, you need to configure
basic network settings manually.