Appendix
143
Parameter
Permitted
Values
Descriptions
Web Setting Path
phone_setting
.hold_and_hel
d_power_led_
flash_enable
=
0 or 1
It enables or disables the power
indicator LED to flash when a call is
placed on hold or is held.
For SIP-T2xP/T19P IP phones:
0-Disabled (power indicator LED does
not flash)
1-Enabled (power indicator LED fast
flashes (500ms) green)
The default value is 0.
For SIP-T4X IP phones:
0-Disabled (power indicator LED does
not flash)
1-Enabled ( power indicator LED fast
flashes (500ms) red)
The default value is 0.
If it is set to 0, the status of the power
indicator LED is determined by the
value of the parameter
“phone_setting.common_power_led_e
nable”.
Features->Power
LED->Hold/Held
Power Light On
phone_setting
.talk_and_dial
_power_led_e
nable =
0 or 1
It enables or disables the power
indicator LED to be turned on when the
phone is busy.
For SIP-T2xP/T19P IP phones:
0-Disabled (power indicator LED is off)
1-Enabled ( power indicator LED is
solid green)
The default value is 1.
For SIP-T4X IP phones:
0-Disabled (power indicator LED is off)
1-Enabled (power indicator LED is solid
red)
The default value is 0.
If it is set to 0, the status of the power
indicator LED is determined by the
value of the parameter
“phone_setting.common_power_led_e
Features->Power
LED->Talk/Dial
Power Light On
Содержание T19P
