Yealink IP Phones Auto provisioning Guide
162
Parameter
Permitted
Values
Descriptions
Web Setting Path
to 3.
SIP-T21P/T20P:
X ranges from
1 to 2.
SIP-T19P: X=1.
Y ranges from
1 to 2)
the primary server when the SIP
server’s registration requires renewal.
3-duration: the phone retries to use the
primary server after the timeout
defined by the parameter
“account.X.failback_timeout”.
The default value is 0.
account.X.sip_
server.Y.failba
ck_timeout =
(SIP-T28P/T48G
/T46G: X
ranges from 1
to 6.
SIP-T26P/T22P/
T42G/T41P: X
ranges from 1
to 3.
SIP-T21P/T20P:
X ranges from
1 to 2.
SIP-T19P: X=1.
Y ranges from
1 to 2.)
Integer 0,
from 60 to
65535
It configures the timeout (in seconds)
for the phone to retry to use the
primary server after failing over to the
current working server for account X
when the parameter
“account.X.sip_server.Y.failback_mode
” is set to 3 (duration).
If you set the parameter between 1
and 59, the timeout will be 60 seconds.
The default value is 3600.
account.X.sip_
server.Y.regist
er_on_enable
=
(SIP-T19P: X=1
SIP-T20P/T21P:
X ranges from
1 to 2.
SIP-T22P/T26P/T
41P/T42G: X
ranges from 1
to 3.
SIP-T28P/T46G/
T48G: X
ranges from 1
0 or 1
It enables or disables the phone to
send registration requests to the
secondary server for account X when
encountering a failover.
0-Disabled
1-Enabled
The default value is 0.
Содержание T19P
