Yealink T19P-E2, Руководство по настройке

Страница: 70 / 92

Yealink IP Phones Configuring Guide
60
4.
Mark the desired radio box in the
Intercom Tone
field.
5.
Mark the desired radio box in the
Intercom Barge
field.
6.
Click
Save changes
to accept the change.
7.
Perform auto provisioning on the phone to download above configurations. For more
information on how to perform auto provisioning, refer to
Downloading Configuration Files
on page 39 .
Multicast Paging
You can use multicast paging to quickly and easily broadcast time-sensitive announcements to
users who are listening to a specific multicast group.
Note
You cannot configure multicast paging via CommPortal phone configurator for SIP-T19(P) E2,
and W60B/W80B phones.
Configuring a Multicast Paging key
You can configure a multicast paging key, which allows you to send a Real-time Transport
Protocol (RTP) stream to the pre-configured multicast address(es) without involving SIP
signaling.
To configure a multicast paging key via the CommPortal phone configurator:
1.
Click on
Programmable Keys - Line Key
->
Key X
.
2.
Select
Multicast Paging
from the
Soft key action
field.
3.
Enter the multicast IP address (for example: 224.5.6.20:10008) in the
IP address
field.
The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
4.
Enter the multicast IP port number (for example: 10008) in the
Port
field.