Yealink T19P-E2, Руководство по настройке

Страница: 17 / 92

Customizing Your Phone
7
Example:
The user registers a SIP account for the IP phone and then set the value of Timer T1, Timer T2
respectively (Timer T1: 0.5, Timer T2: 4). The SIP registration request message will be
re-transmitted between the IP phone and SIP server. The re-transmitting and doubling of Timer
T1 (0.5) will continue until the retransmitting time reaches the Timer T2 (4). The total registration
request retry time will be less than 64 times of T1 (64 * 0.5 = 32). The re-transmitting interval in
sequence is: 0.5s, 1s, 2s, 4s, 4s, 4s, 4s, 4s, 4s and 4s.
Timer T4
Timer T4 represents that the network will take to clear messages between the SIP client and
server.
Configuring SIP Session Timer
To configure SIP session timer via CommPortal phone configurator:
1.
Click
Preference
->
SIP
.
2.
Enter the desired value in the
SIP Session Timer T1
field.
The valid value is 0.5-10s, and the default value is 0.5s.
3.
Enter the desired value in the
SIP Session Timer T2
field.
The valid value is 2-40s, and the default value is 4s.
4.
Enter the desired value in the
SIP Session Timer T4
field.
The valid value is 2.5-60s, and the default value is 5s.
5.
Click
Save changes
to accept the change.
6.
Perform auto provisioning on the phone to download above configurations. For more
information on how to perform auto provisioning, refer to
Downloading Configuration
Files on page 39 .