Yealink SIP-T27P Скачать руководство пользователя страница 173 | Manualshive

Страница: 173 / 192

Yealink SIP-T27P Скачать руководство пользователя страница 173

Advanced Phone Features

163

4.

Press the Save soft key to accept the change or the Back soft key to cancel.

Note

To listen to voice mails:

1.

When the LCD screen prompts that the phone receives a new voice mail and the
power indicator LED slow flashes red, you can press or the Connect soft key to
dial out the voice mail access code.

2.

Follow the voice prompt to listen to your voice mails.

Note

To view the voice mail via phone user interface:

1.

Press Menu->Messages->Voice Mail->View Voice Mail.

The LCD screen displays the amount of new and old voice mails.

2.

Select an account and then press the Connect soft key to listen to voice mails.

The SIP-T27P IP phone supports MWI when receiving a new voice message. If someone
leaves you a voice mail, you will receive a message waiting indicator. MWI will be
indicated in three ways: a warning tone, an indicator message (including a voice mail
icon) on the LCD screen, and the power indicator LED slow flashes red. This will be
cleared when you retrieve all voice mails or delete them.

The MWI service is unsolicited for some servers, so the SIP-T27P IP phone only handles
the MWI messages sent from the server. But for other servers, the MWI service is
solicited, so the SIP-T27P IP phone must enable subscription for MWI.

Note

Voice mail access codes must be predefined on the system server. Contact your system
administrator for the more information.

MWI service is not available on all servers. Contact your system administrator for more
information.

Before listening to voice mails, make sure the voice mail access code has been
configured.

When all new voice mails are retrieved, the power indicator LED will go out.

«
...
171
172
173
174
175
...
»

Содержание SIP-T27P

































































































































































































Отзывы:

Нет отзывов