Yealink SIP-T2 Series, Руководство по автоматической настройке

Страница: 77 / 241

Appendix
67
Parameter
Permitted
Values
Descriptions Web Setting Path
(not
applicable to
SIP-T42G/T41P
IP phones) characters The default value is blank.
It takes effect after a reboot.
PPPoE->Password
network.ipv6_i
nternet_port.ty
pe =
0 or 1
It configures the Internet (WAN) port
type for IPv6 when the IP address
mode is configured as IPv6 or
IPv4&IPv6.
0-DHCP
1-Static IP Address
The default value is 0.
It takes effect after a reboot.
Network->Basic->
IPv6 Config
network.ipv6_
static_dns_en
able =
0 or 1
It enables or disables the phone to use
manually configured static IPv6 DNS
when Internet (WAN) port type for IPv6
is configured as DHCP.
0-Disabled (use the IPv6 DNS obtained
by DHCP)
1-Enabled
The default value is 0.
It takes effect after a reboot.
Network->Basic->
IPv6 Config->IPv6
Static DNS
network.ipv6_
prefix = Integer from
0 to 128
It configures the IPv6 prefix when the IP
address mode is configured as IPv6 or
IPv4&IPv6, and the Internet (WAN) port
type for IPv6 is configured as Static IP
Address.
The default value is 64.
It takes effect after a reboot.
Network->Basic->
IPv6 Config->Static
IP Address->IPv6
Prefix (0~128)
network.ipv6_i
nternet_port.i
p =
IPv6 address
It configures the IPv6 address when the
IP address mode is configured as IPv6
or IPv4&IPv6, and the Internet (WAN)
port type for IPv6 is configured as
Static IP Address.
The default value is blank.
It takes effect after a reboot.
Network->Basic->
IPv6 Config->Static
IP Address->IP
Address
network.ipv6_i
nternet_port.g
IPv6 address
It configures the IPv6 default gateway
when the IP address mode is Network->Basic->
IPv6 Config->Static