Yealink SIP-T2 Series, Руководство по автоматической настройке

Страница: 154 / 241

Yealink IP Phones Auto provisioning Guide
144
Parameter
Permitted
Values
Descriptions Web Setting Path
nable”.
phone_setting
.talk_and_dial
_power_led_e
nable =
0 or 1
It enables or disables the power
indicator LED to be turned on when the
phone is busy.
For SIP-T2xP/T19P IP phones:
0-Disabled (power indicator LED is off)
1-Enabled ( power indicator LED is
solid green)
The default value is 1.
For SIP-T4X IP phones:
0-Disabled (power indicator LED is off)
1-Enabled (power indicator LED is solid
red)
The default value is 0.
If it is set to 0, the status of the power
indicator LED is determined by the
value of the parameter
“phone_setting.common_power_led_e
nable”.
Features->Power
LED->Talk/Dial
Power Light On
features.relog
_offtime = Integer from
1 to 1000
It configures the web access timeout
(in minutes).
The default value is 5.
It takes effect after a reboot.
Features->General
Information->Auto-
Logout Time
(1~1000min)
features.direct
_ip_call_enabl
e =
0 or 1
It enables or disables the phone to
make an IP call directly.
0-Disabled
1-Enabled
The default value is 1.
Features->General
Information->
Allow IP Call
features.allow
_mute =
0 or 1
It enables or disables the phone to
mute an active call.
0-Disabled
1-Enabled
The default value is 1.
Features->General
Information->Allo
w Mute
features.grou
p_listen_in_tal
king_enable =
0 or 1
It enables or disables the phone to
enter into the group listening mode by
pressing the speakerphone key when