Yealink SIP-T2 Series, Руководство по автоматической настройке

Страница: 26 / 241

Yealink IP Phones Auto provisioning Guide
16
####################################################
## Configure the access URL of the LCD language file ##
####################################################
gui_lang.url =
If you want to modify the translation of an existing language, configure the parameter
“gui_lang.url =” in the configuration file, for example:
gui_lang.url = tftp://192.168.1.100/lang+English.txt.
During the auto provisioning process, the phone connects to the provisioning server
“192.168.1.100”, and downloads the language file “lang+English.txt”.
If you want to add a new language “Russian” to SIP-T4X IP phones, configure the
parameter “gui_lang.url =” in the configuration file, for example:
gui_lang.url = tftp://192.168.1.100/lang-Russian.txt
During the auto provisioning process, the phone connects to the provisioning server
“192.168.1.100”, and downloads the language file “lang-Russian.txt”. After update, you
will find a new language selection “Russian” on the phone user interface:
Menu->Basic->Language.
#Delete all custom languages.
gui_lang.delete = http://localhost/all
Yealink IP phones allow you to customize the logo displayed on the LCD screen. SIP-T20P
IP phones only support a text logo. Logo is not applicable to SIP-T48G/T46G IP phones.
These two IP phone models use the wallpaper instead.
The following table lists the supported logo file format and resolution for each phone
model:
Phone Model Logo File Format Resolution
SIP-T28P .dob <=236*82 2 gray scale
SIP-T26P .dob <=132*64 2 gray scale
SIP-T22P/T21P/T19P .dob <=132*64 2 gray scale
SIP-T42G/T41P .dob <=192*64 2 gray scale
SIP-T48G/T46G IP phones also support adding a custom or modify an existing LCD
language with an X.GUI.Y.lang (e.g., 0.GUI.English.lang) formatted language file. “X” is
an integer which starts from 0. “Y” means the name of the language.
Available languages may vary between different firmware versions.
English language file name must be “
lang+English.txt”.
To modify translation of an existing language, do not rename the language file.