Yealink SIP-T2 Series, Руководство по автоматической настройке

Страница: 13 / 241

Getting Started
3
This section provides instructions on how to get ready for auto provisioning. The auto
provisioning process discussed in this guide uses the TFTP server as the provisioning
server.
To begin the auto provisioning process, the following steps are required:

Obtaining Configuration Information

Managing Configuration Files
Before beginning provisioning, you need to obtain configuration files. There are two
configuration files both of which are CFG-formatted. We call these two files Common
CFG file and MAC-Oriented CFG file. The phone tries to download these CFG files from
the server during provisioning.
The MAC-Oriented CFG file is only effectual for the specific phone. It uses the 12-digit
MAC address of the phone as the file name. For example, if the MAC address of the
phone is 0015651130F9, the MAC-Oriented CFG file name must be 0015651130F9.cfg.
However, the Common CFG file is effectual for all the phones with the same model. It
uses a fixed name “y0000000000XX.cfg” or “y00000000000X.cfg” as the file name,
where "XX" or “X” equals to the first two digits or the first digit (except 0 for SIP-T28P) of
the hardware version of the phone model.
The names of the Common CFG file for each phone model are:
Phone Model Common CFG File
SIP-T28P y000000000000.cfg
SIP-T26P y000000000004.cfg
SIP-T22P y000000000005.cfg
SIP-T21P y000000000034.cfg
SIP-T20P y000000000007.cfg
SIP-T19P y000000000031.cfg
SIP-T48G y000000000035.cfg
SIP-T46G y000000000028.cfg