Yealink CP860 SERIES, Руководство администратора

Страница: 84 / 1126

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
58
Parameters Permitted Values Default
Menu->Advanced (default password: admin) ->Network->WAN Port->IP Mode
static.network.internet_port.ip IPv4 Address Blank
Description:
Configures the IPv4 address.
Example:
static.network.internet_port.ip = 192.168.1.20
Note
: It works only if the value of the parameter “static.network.ip_address_mode” is set to
0 (IPv4) or 2 (IPv4 & IPv6), and “static.network.internet_port.type” is set to 2 (Static IP
Address). If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Basic->IPv4 Config->Static IP Address->IP Address
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->WAN Port->IPv4->Type (Static
IP)->IP Address
static.network.internet_port.mask Subnet Mask Blank
Description:
Configures the IPv4 subnet mask.
Example:
static.network.internet_port.mask = 255.255.255.0
Note:
It works only if the value of the parameter “static.network.ip_address_mode” is set to
0 (IPv4) or 2 (IPv4 & IPv6), and “static.network.internet_port.type” is set to 2 (Static IP
Address). If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Basic->IPv4 Config->Static IP Address->Subnet Mask
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->WAN Port->IPv4->Type (Static
IP)->Subnet Mask
static.network.internet_port.gateway IPv4 Address Blank
Description:
Configures the IPv4 default gateway.
Example: