Yealink CP860 SERIES, Руководство администратора, Страница: 107 / 1126

Setting Up Your System
81
Parameters Permitted Values Default
(Enabled). If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Advanced->CDP->Packet Interval (1~3600s)
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->CDP->Packet Interval
To configure CDP via web user interface:
1.
Click on
Network
->
Advanced
.
2.
In the
CDP
block, select the desired value from the pull-down list of
Active
.
3.
Enter the desired time interval in the
Packet Interval (1~3600s)
field.
4.
Click
Confirm
to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
5.
Click
OK
to reboot the phone.
To configure CDP feature via phone user interface:
1.
Press
Menu
->
Advanced
(default password: admin) ->
Network
->
CDP
->
CDP Status
.
2.
Press or , or the
Switch
soft key to select the desired value from the
CDP Status
field.
3.
Enter the priority value (1-3600s) in the
Packet Interval
field.
4.
Press the
Save
soft key to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
5.
Click
OK
to reboot the phone.
Manual Configuration for VLAN in the Wired Network
VLAN is disabled on IP phones by default. You can configure VLAN for the Internet port and PC
port manually. For CP860/CP920 IP phones, you can only configure VLAN for the Internet port
manually, because they only have Internet port. Before configuring VLAN on the IP phone, you
need to obtain the VLAN ID from your network administrator.