YATO YT-82350, Оригинальное руководство пользователя

Страница: 14 / 108

14
GB
O R I G I N A L I N S T R U C T I O N S
PRODUCT DESCRIPTION
The wall sander with a handle is a power tool using sanding discs to sand large, fl at surfaces. Thanks to the long handle, it is pos-
sible to sand walls without using any platforms. The sander features a system for the extraction of dust generated during works,
and a hose to connect the unit to a vacuum device, which reduces the amount of dust in the work area. As the proper use of the
power tool is a condition for the correct, reliable and safe operation of it, please
read and preserve the entire Manual before the fi rst use of the tool.
The Supplier shall not be held liable for any damage resulting from failure to observe the safety regulations and recommendations
specifi ed in this Manual.
ACCESSORIES
The unit is supplied as a complete package, but it requires some assembly work. The sander package includes
- sanding sheet
- hose
- additional sanding head
- extension arm
TECHNICAL PARAMETERS
Parameter Measure Unit Value
Order No. YT-82350
Power supply voltage [V] 230 - 240
Power frequency [Hz] 50
Rated power [W] 710
Rated speed (disc) [min -1 ] 600 - 1500
Rated oscillations (delta) [min -1 ] 3000 - 6000
Spindle size M6
Disc fi xing ring diameter [mm] 215
Sanding disc diameter [mm] 225 / 215 / 210
Weight [kg] 3.39
Noise level
- sound pressure L
pA
± K
pA
[dB (A)] 88.0 ± 3.0
- power L
wA
± K
wA
[dB (A)] 99.0 ± 3.0
Vibration level
ah,AG
± K (disc/delta) [m/s 2 ] 3.48 ± 1.5 / 3.51 ± 1.5
Protection class II
Ingress Protection Rating IP20
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and specifi cations provided with this power tool. Failure to do so may
result in electric shock, fi re or serious injury.
Keep all warnings and instructions for future reference.
The term “power tool” used in warnings applies to all tools driven by power both wired and wireless.
Workplace safety
Keep the workplace well-lit and clean. Disorder and poor lighting can be causes of accidents.
Do not work with power tools in an environment with an increased risk of explosion, containing fl ammable liquids, gases
or vapors. Power tools generate sparks that can ignite dust or fumes.
Children and third persons should not be allowed to enter the workplace. Loss of concentration can result in loss of control.
Electrical safety
The plug of the electric cable must match the power socket. You must not modify the plug in any way. Do not use any
plug adapters with earthed power tools. An unmodifi ed plug that fi ts the outlet reduces the risk of electric shock.
Avoid contact with earthed surfaces such as pipes, radiators and coolers. Grounding the body increases the risk of electric shock.
Do not expose power tools to contact with atmospheric precipitation or moisture. Water and moisture that gets inside the
power tool increases the risk of electric shock.