1.
Power-off your system.
2.
Remove if exists the wiring of the module.
3.
For demounting and exchange of a (head) module or a group of
modules, due to mounting reasons you always have to remove the
electronic module right beside. After mounting it may be plugged
again.
Press the unlocking lever at the lower side of the just mounted right module and pull
it forward.
4.
Turn the locking lever of the module to be exchanged upwards.
5.
Pull the module.
6.
For mounting turn the locking lever of the module to be mounted upwards.
7.
To mount the module put it to the gap between the both modules and push it,
guided by the stripes at both sides, to the mounting rail.
8.
Turn the locking lever downward, again.
Exchange of a periphery
module
VIPA System SLIO
Basics and mounting
Demounting 8x periphery modules
HB300 | FM | 050-1BB30 | en | 20-40
30
