Chapter 1 Assembly and installation guidelines
Manual VIPA System 300S SPEED7
1-6
HB140E - PS - RE_307-1FB70 - Rev. 13/43
SLOT1
DCDC
CPU
SLOT2
•
If also standard modules shall be plugged, take a
bus coupler and click it at the CPU from behind
like shown in the picture.
•
Plug the CPU between the triangular positioning
helps to the plug-in location marked with "CPU
SPEED7" and pull it down.
•
Fix the CPU by screwing.
SLOT1
DCDC
CPU
SLOT2
•
Repeat this procedure with the peripheral
modules, by clicking a backplane bus coupler,
stick the module right from the modules you've
already fixed, click it downwards and connect it
with the backplane bus coupler of the last module
and bolt it.
Danger!
•
Before installing or overhauling the System 300V, the power supplies
must be disconnected from voltage (pull the plug or remove the fuse)!
•
Installation and modifications only by properly trained personnel!
Installation CPU
with Standard-Bus-
Modules
Installation
Standard-Bus-
Modules
All manuals and user guides at all-guides.com
