YASKAWA VIPA 050-1BS00 Скачать руководство пользователя страница 4

Страница: 4 / 53

General

1.1 Copyright

YASKAWA Europe GmbH

This document contains proprietary information of YASKAWA and is not to be disclosed

or used except in accordance with applicable agreements.

This material is protected by copyright laws. It may not be reproduced, distributed, or

altered in any fashion by any entity (either internal or external to YASKAWA) except in

accordance with applicable agreements, contracts or licensing, without the express

written consent of YASKAWA and the business management owner of the material.

For permission to reproduce or distribute, please contact: YASKAWA Europe GmbH,

European Headquarters, Hauptstraße 185, 65760 Eschborn, Germany

Tel.: +49 6196 569 300

Fax.: +49 6196 569 398

Email: [email protected]

Internet: www.yaskawa.eu.com

Every effort has been made to ensure that the information contained in

this document was complete and accurate at the time of publishing. Nev-

ertheless, the authors retain the right to modify the information.

This customer document describes all the hardware units and functions

known at the present time. Descriptions may be included for units which

are not present at the customer site. The exact scope of delivery is

described in the respective purchase contract.

Hereby, YASKAWA Europe GmbH declares that the products and systems are in compli-

ance with the essential requirements and other relevant provisions. Conformity is indi-

cated by the CE marking affixed to the product.

For more information regarding CE marking and Declaration of Conformity (DoC), please

contact your local representative of YASKAWA Europe GmbH.

VIPA, SLIO, System 100V, System 200V, System 300V, System 300S, System 400V,

System 500S and Commander Compact are registered trademarks of YASKAWA Europe

GmbH.

SPEED7 is a registered trademark of YASKAWA Europe GmbH.

SIMATIC, STEP, SINEC, TIA Portal, S7-300, S7-400 and S7-1500 are registered trade-

marks of Siemens AG.

Microsoft and Windows are registered trademarks of Microsoft Inc., USA.

Portable Document Format (PDF) and Postscript are registered trademarks of Adobe

Systems, Inc.

All other trademarks, logos and service or product marks specified herein are owned by

their respective companies.

EC conformity declaration

Conformity Information

Trademarks

VIPA System SLIO

General

YASKAWA Europe GmbH

HB300 | FM | 050-1BS00 | en | 20-40

Содержание VIPA 050-1BS00






















































Результаты поиска

Содержание VIPA 050-1BS00

Отзывы:

Похожие инструкции для VIPA 050-1BS00

Бренды по названию

Популярные бренды

YASKAWA VIPA 050-1BS00, Руководство пользователя

Результаты поиска

Содержание VIPA 050-1BS00

Отзывы:

Похожие инструкции для VIPA 050-1BS00

Бренды по названию

Популярные бренды