9 pin SubD jack
An RJ45 jack provides the interface to the twisted pair cable, required for Ethernet.
Using the "Host"-USB-A interface USB mouse, keyboard, stick or USB hard discs can be
connected.
For project transfer with Microsoft ActiveSync a programming cable can be connected
using the "Slave"-USB-B interface. This type of transfer is only supported by Windows
Ò
XP.
The USB-A interface of your PC can be connected to the "Slave"-USB-B interface of your
Touch Panel deploying the USB programming cable.
The USB programming cable is delivered by Yaskawa with order No. 670-0KB10.
The Touch Panelhas got an integrated power supply. The power supply has to be pro-
vided with DC 24V (20.4 ... 28.8V). For this you find an according DC 24V slot on the
bottom side.
The power supply is protected against inverse polarity and overcurrent. The battery for
the clock of the Touch Panel is an accumulator with a suitable charging circuit. This accu-
mulator is maintenance-free and does not need to be exchanged within the life span of
the Touch Panel.
2.3.3 Memory management
The following memory systems are available for every Touch Panel:
n
1GB work memory
n
8GB user memory (ca. 6GB for user data)
n
USB storage media connected via "Host"-USB-A interface
n
Slot for CF (Type II)
n
Slot for MMC/SD
Please only use memory cards formatted with FAT(32)!
MPI/PROFIBUS DP inter-
face
Ethernet connection
"Host"-USB-A
"Slave"-USB-B
Power supply
Overview
HMI
Hardware description
Structure > Memory management
HB160 | TP | 62M-JJK0 | en | 23-10
12
