Quick Setup Guide
Congratulations on the purchase of your new Samsung TV.
Read this setup guide to get your TV up and running quickly.
1-800-SAMSUNG (1-800-726-7864)
Samsung Electronics America, Inc.
105 Challenger Road Ridgefield Park, NJ 07660-0511
Samsung Electronics Canada Inc.
55 Standish Court Mississauga, Ontario L5R 4B2
Call Center hours of operation: Mon-Sun, 9:00 AM -12
AM EST.
To register this product, visit: www.samsung.com/
register.
STOP
Please do not return this unit.
If you have problems operating your
TV, call:
1-800-SAMSUNG (1-800-726-7864)
For web support please visit:
www.samsung.com/support
Step 4
: Connect External Devices
Connecting an AV device (DVD/Blu-ray player, cable/satellite box, etc.)
Use one of the connections below to connect your TV to an external A/V device. We recommend using HDMI for the highest picture quality.
Connecting an audio device (Home Theater, etc.)
Connect your TV to your Home Theater or other audio device to enjoy enhanced
Sound quality.
Connecting a PC
Connect your TV to a PC to use it as a Monitor.
✎
When connecting to
AV IN 1
on the back of your TV, attach the
video cable (yellow) to the green jack next to the
AV IN 1
label.
The jack will not match the color of the video cable (yellow).
U
Move
E
Enter
Select Language of the OSD.
Menu Language
:
Plug & Play
English
Español
Français
Step 5
: Run Plug & Play
When you turn on your TV for the first time, it automatically launches the Plug &
Play function. With Plug & Play, you can select the On Screen Display language,
set the clock mode, and launch the TV’s channel memorizing process.
It also displays connection instructions similar to those in this guide.
To navigate while Plug & Play is running, press the Up, Down, Left or Right arrow
buttons on your remote. To make a selection, press the
ENTER
E
button.
To skip a screen, press the
MENU
button. To turn on your TV, press the
POWER
button on the remote or on the TV. To run Plug & Play, follow these steps:
1
Using your remote control,
select the language for the On
Screen Display (OSD), and then
press the
ENTER
E
button.
2
Select
Home Use
, and then
press the
ENTER
E
button. If you select
Store Demo
, the TV will reset your
picture and audio settings every 30 minutes.
3
Select
Antenna Source
and
Channel Source
. If
Antenna Source
is
Cable
or
Auto
, you must select
Channel Source
to same type as your
cable system type. After selecting source, select
Search
; then press the
ENTER
E
button on your remote.
✎
Most cable systems are Standard(STD) systems, If you are not sure
about what kind of cable system you have, contact your cable company.
✎
If your TV is attached to a cable or satellite box, skip Steps 3 through 5.
After Plug & Play is complete, set your TV to Channel 3 or 4, according
to the directions for your cable or satellite box.
4
The TV memorizes the available channels. This process can take up to 45
minutes.
5
After the TV has memorized the channels, choose the
Clock Mode
. Select
Auto
if you have a digital channel in your area. Select
Manual
if you don’t, or
if you have a cable or satellite box. When done, press the
ENTER
E
button.
✎
If you select
Manual
, the clock setting screen appears.
6
Select the daylight savings time setting:
Off
or
On
, and then press the
ENTER
E
button
7
Select the time zone in which you live, and then press
ENTER
E
button.
8
After the time zone screen, The connection method for best HD screen
quality is displayed. Press Right arrow button on your remote to view each
screen in succession. Press the Blue button to skip this section.
9
The
Enjoy your TV.
screen appears. Then press the
ENTER
E
button.
Changing the Screen Size
Your TV has several screen size options, each designed to work best with specific
types of video input. If you have a cable box or satellite receiver, it may have its own
set of screen sizes as well.
To change the screen size, press the
P.SIZE
button on your remote. The first time
you press it, your TV displays the current setting. Thereafter, each time you press
the
P.SIZE
button, you change the size of the picture on the screen.
The following sizes are available:
16:9
Wide screen
4:3
Standard screen
Wide Fit
Zoom 1
Zoom 2
Screen Fit
✎
Screen Fit
Displays the full image without any cut-off when HDMI (720p /
1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
Changing the Picture Mode
Your TV has three preset
Picture
Modes with factory adjusted settings, each
designed to give you an excellent picture under specific conditions.
To change the
Picture
mode, press the
P.MODE
button on your remote. The first
time you press it, your TV displays the current setting. Thereafter, each time you
press the
P.MODE
button, you change the mode of the picture on the screen.
The
Picture
Modes are listed and described in the table below:
Mode
Description
Dynamic
Brightens picture. For a vibrant, enhanced image in brightly lit or
sunny room.
Standard
For a bright, detailed picture in a normally lit room.
Movie
For a studio quality cinema picture in a dimly lit or dark room.
To change the
Picture Mode
, follow these steps:
1.
Turn on your TV, press the
TOOLS
button on your remote.
The
Tools
menu appears.
2.
Using the
▲
or
▼
on your remote, select
Picture
mode
.
3.
On the
Picture
mode
menu, use the
◄
or
►
on your remote to select the
Picture
mode
you want.
4.
Press the
EXIT
button to exit the menu.
Setting the Clock
Before you can use your TV’s On/Off Timer, you must set the clock. To set the
clock, follow these steps:
1.
Turn on your TV, press the
MENU
button on your remote, then select
Setup
→
Time
.
2.
Select
Clock Mode
, and then press the
ENTER
E
button.
3.
Choose
Auto
or
Manual
.
x
If you select
Auto
, the current time will be set automatically using the time
from a digital channel.
x
If you select
Manual
, you can set the
Month, Day, Year, Hour, Minute
and
am/pm
directly by pressing up, down, left and right arrow button on
your remote.
4.
Press the
RETURN
button on your remote when done.
Component Cable
(Not Supplied)
HDMI OUT
AUDIO OUT
DVI OUT
AUDIO OUT
VIDEO OUT
AUDIO OUT
COMPONENT OUT
Best Connection
HD connection (up to 1080p)
Using an HDMI Cable
DVD
Using an HDMI to DVI Cable
HD connection (up to 1080p)
Very Good Connection
Device
Using an Audio/Video Cable
Good Connection
Component connection (up to 1080p)
Blu-ray player
Lowest Quality Connection
Using a Component Cable
Audio/Video connection (480i only)
Device
Audio Cable
(Not Supplied)
HDMI to DVI Cable
(Not Supplied)
Audio Cable
(Not Supplied)
Audio Cable
(Not Supplied)
HDMI Cable (Not Supplied)
Video Cable (Not Supplied)
AUDIO IN
OPTICAL
Analog Audio connection
Digital Audio connection
Amplifier / DVD
home theater
Using an Audio Cable
Using an Optical Cable
Digital Audio System
Audio Cable
(Not Supplied)
Optical Cable (Not Supplied)
DVI OUT
AUDIO OUT
AUDIO OUT
PC OUT
HD connection
Using a DVI to HDMI Cable
Using an D-Sub Cable
Audio Cable (Not Supplied)
HDMI to DVI Cable (Not Supplied)
D-Sub Cable
(Not Supplied)
Audio Cable (Not Supplied)
DVD / Blu-ray player / HD Cable
Box / HD STB (Set-Top-Box)
satellite receiver
DVD / Blu-ray player / HD Cable Box / HD
Satellite receiver (STB)
DVD, Blu-ray player, cable box,
STB satellite receiver, VCR
Step 1
: Install the Stand
50 inches model only
Follow the steps below to connect the TV to the stand.
✎
NOTE
x
Make sure to distinguish between the front and back of the Stand and
Guide Stand when assembling them.
x
Make sure that at least two persons lift and move the PDP TV.
x
Stand the product up fasten the screws. If you fasten the screws with the
with the PDD TV placed down, it may lean to one side.
1
Connect the Guide Stand to the
Stand using five screws (M4 X L12)
as shown.
2
With your TV upright, connect the
TV to the Stand as shown.
3
Fasten two screws (M4 X L12) at
position
1
, and then fasten the
two screws (M4 X L2) at position
2
.
1
2
Step 2
: Install the Batteries into the Remote
To install batteries into your remote
control, follow these steps:
1.
Lift the cover on the back of the
remote upward as shown in the figure
to the right.
2.
Install two AAA batteries.
✎
Make sure to match the + and - ends of the batteries to the diagram in
the battery compartment.
3.
Replace the cover.
Step 3
: Connect Power and Antenna or Cable
Top view
Rear
Front
Rear
Guide Stand
Screws (M4 X L12)
Stand
Rear
VHF/UHF Antenna
Connect Ant In to
• Wall cable jack
• VHF/UHF Antenna
• Cable or Satellite box
Ant or Cable Out
Make sure the AC power cord is plugged in securely to
the wall outlet and the TV.
Use a 75 ohm (round) cable.
or
[540QSG]BN68-02614C-Eng.indd 1
2010-03-05 오후 4:14:53
