YASKAWA SI-T3 MECHATROLINK-II A1000 Series, Руководство по установке

Страница: 10 / 46

2 Overview
10 YASKAWA ELECTRIC TOBP C730600 86F YASKAWA AC Drive Option SI-T3 Installation Manual
Note: 1. MECHATROLINK-II commands differ between Intelligent I/O slave devices and MECHATROLINK
Drive slave devices. Refer to the option Technical Manual for more information.
2. Refer to the option package labeling in the field designated “PRG” (four digit number)” or the option
labeling in the field designated “C/N” (S + four digit number)” to identify the option software version.
3. For Yaskawa customers in the North or South America region:
If your product is not listed in Table 1 , refer to the web page below to confirm this manual is correct for
your product. The web page provides a list of option manuals by product, and a direct link to download
a PDF.
Scan QR code
Or refer to: http://www.yaskawa.com/optionlookup
<3> Before you install the option on a YASKAWA Energy-Saving Unit D1000 or R1000, make sure that the option
software version is PRG: 6105 or later.
<4> Before you install the option on a YASKAWA AC Drive GA500, GA700, GA800, CR700, or CH700, make sure
that the option software version is PRG: 6108 or later.
TOBP_C730600_86F_7_0_E.fm 10 ページ ２０１８年１２月２０日 木曜日 午後６時１６分