7.1 Interpreting Panel Displays
7.1.1 Panel Display during the HWBB State
7-2
7.1
Interpreting Panel Displays
You can check the Servo Drive status on the panel display of the SERVOPACK.
Also, if an alarm or warning occurs, the alarm or warning number will be displayed.
This section describes the panel displays during the HWBB state. Refer to the following manual
for other panel displays.
Σ
-7-Series
Σ
-7W SERVOPACK with MECHATROLINK-III Communications References Product Manual (Manual No.:
SIEP S800001 29)
7.1.1
Panel Display during the HWBB State
You can check the Servo Drive status on the panel display of the SERVOPACK.
During the HWBB state, the display will be changed in the following order.
The
Σ
-7C SERVOPACKs do not have a panel display. You can check the status of the Servo
Drive from the S.
Information
Not lit.
Not lit.
Not lit.
Not lit.
Status Display
