manualshive.com logo in svg

YASKAWA MOTOMAN-VA1400, Инструкция по эксплуатации

Поделиться
Скачать
YASKAWA MOTOMAN-VA1400 Скачать руководство пользователя страница 54

9     Maintenance and Inspection
9.3  Notes on Grease Replenishment/Exchange Procedures

9-9

155556-1CD

HW0484963

VA1400

9.3.1.2 Grease 

Exchange 

(Refer to 

Fig. 9-4 “S-Axis Speed Reducer Diagram”

.)

1. Remove the hexagon socket head plugs PT1/8 from the grease inlet 

and grease exhaust port.

2. Install a grease zerk PT1/8 to the grease inlet.  (The grease zerk is 

delivered with the manipulator.)

3. Inject the grease through the grease inlet using a grease gun.

– Grease type: 

VIGO Grease RE No. 0

– Amount of grease: 

approx. 450 cc

– Air supply pressure of grease pump:  0.3 MPa or less

– Grease injection rate: 

8 g/s or less

4. The grease exchange is completed when new grease appears in the 

grease exhaust port.  (The new grease can be distinguished from the 
old grease by color.)

5. Move the S-axis for a few minutes to discharge excess grease.

6. Wipe the discharged grease with a cloth.  Remove the grease zerk 

from the grease inlet, and reinstall the plugs to the grease inlet and 
grease exhaust port.  Before installing the plugs, apply Three Bond 
1206C on the thread part of each plug, then tighten the plug with a 
tightening torque of 4.9 N•m (0.5 kgf•m). 

NOTE

• If grease is injected with the plug on, the grease will leak 

inside the motor and may cause a damage.  Make sure to 
remove the plug before the grease injection.

• Do not install a joint, a hose, etc. to the grease exhaust 

port.  Failure to observe this instruction may result in 
damage to the motor due to coming off of an oil seal.

54 of 85

Содержание MOTOMAN-VA1400






















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды