3-2
151521-1CD
151521-1CD
3.2
Lifting Instructions
The HD Drive Module is shipped on a wooden shipping skid. The customer is responsible for removing
the positioner from the shipping skid and inspecting for shipping damage. The HD Drive Module can be
moved by forklift, or by overhead crane and straps using the M16 eyebolts provided. To install the HD
Drive Module, proceed as follows:
1.
Carefully remove protective plastic wrapping from drive assembly.
2.
Inspect drive assembly for shipping damage.
3.
Unbolt the module from the shipping skid using a ¾-inch socket.
4.
Attach slings from lifting device to the four lifting eyes (see
Fig. 3-1 Shipping
5.
Using the lifting device, lift the drive assembly and place in desired location.
Forklift truck operation should be performed only by licensed personnel. Never place any part of your
body under a suspended load or move a suspended load over any part of another person’s body.
Careless handling may result in severe personal injury or death.
If any equipment is damaged, notify the shipper immediately.
DANGER
NOTE
TO LIFTING DEVICE
19 of 47