YASKAWA L1000V CIMR-LC V Series, Быстрый старт

Страница: 42 / 54

7 Parameter Table
EN 42 YASKAWA Europe TOEP C710606 50B - AC Drive L1000V - Quick Start Guide
S2-02/
S2-03
Slip Com-
pensation
Gain
Motoring /
Regen.
Mode
Set the slip compensation gain for
motoring operation (S2-02) and
during regenerative operation (S2-
03).
Induction Motor Auto-Tuning
T1-01
Auto-Tun-
ing Mode
Selection
0: Rotational Auto-Tuning
1: Stationary Auto-Tuning
2: Stationary Auto-Tuning for
Line-to-Line Resistance
T1-02
Motor
Rated
Power
Sets the motor rated power as spec-
ified on the motor nameplate.
T1-03
Motor
Rated Volt-
age
Sets the motor rated voltage as
specified on the motor nameplate.
T1-04
Motor
Rated Cur-
rent
Sets the motor rated current as
specified on the motor nameplate.
T1-05
Motor Base
Frequency
Sets the rated frequency of the
motor as specified on the motor
nameplate.
T1-06
Number of
Motor Poles
Sets the number of motor poles as
specified on the motor nameplate.
T1-07
Motor Base
Speed Sets the rated speed of the motor as
specified on the motor nameplate.
Monitor Description
U1-01 Speed Reference (%)
U1-02 Output Speed (%)
U1-03 Output Current (A)
U1-05 Motor Speed (%)
U1-06 Output Voltage Reference (Vac)
U1-07 DC Bus Voltage (Vdc)
U1-08 Output Power (kW)
U1-09 Torque Reference (% of motor rated torque)
No. Name Description
U1-10
Displays the input terminal status.
U1-11
Displays the output terminal status.
U1-12
Verifies the drive operation status.
U1-16
Output Speed after Soft Starter
U1-18
oPE Fault Parameter
Fault Trace
U2-01 Current Fault
U2-02 Previous Fault
U2-03 Speed Reference at Previous Fault
U2-04 Output Speed at Previous Fault
Monitor Description
U1-10 = 0 0 0 0 0 0 0 0
Digital input 1
(terminal S1 enabled)
Digital input 2
(terminal S2 enabled)
Digital input 3
(terminal S3 enabled)
Digital input 4
(terminal S4 enabled)
Digital input 5
(terminal S5 enabled)
Digital input 6
(terminal S6 enabled)
Digital input 7
(terminal S7 enabled)
1
1
1
1
1
1
1
1
U1-11 = 0 0 0 0 0 0 0 0
Multi-Function
Digital Output
(terminal MA-MB-MC)
Digital Output
(terminal MD-ME-MF)
Digital Output
(terminal P1-MC)
Multi-Function
Multi-Function
Not Used
1
1
1
Not Used
Not Used
Not Used
During run
During zero-speed
Down Direction
Fault reset
signal input
During speed agree
Drive ready
During alarm
detection
During fault detection
1
1
1
1
1
1
1
1
U1-12 = 0 0 0 0 0 0 0 0