YASKAWA
TOEP C720600 05B LCD Keypad Attachment Installation Manual
5
◆
Section Safety
General Precautions
•
Some figures in the instructions include options and drives without covers or safety shields to more clearly show the
inside of the drive. Replace covers and shields before operation. Use options and drives only as specified by the
instructions.
•
The figures in this manual are examples only. All figures do not apply to all products included in this manual.
•
Yaskawa can change the products, specifications, and content of the instructions without notice to make the product
and/or the instructions better.
•
If you damage or lose these instructions, contact a Yaskawa representative or the nearest Yaskawa sales office on the
rear cover of the manual, and tell them the document number on the front cover to order new copies.
DANGER
Electrical Shock Hazard. Do not examine, connect, or disconnect wiring on an energized
drive. Before servicing, disconnect all power to the equipment and wait for the time specified on the warning label
at a minimum. The internal capacitor stays charged after the drive is de-energized. The charge indicator LED
extinguishes when the DC bus voltage decreases below 50 Vdc. When all indicators are OFF, measure for
dangerous voltages to make sure that the drive is safe. If you do work on the drive when it is energized, it will
cause serious injury or death from electrical shock.
CAUTION
Burn Hazard. Do not touch a hot drive heatsink. De-energize the drive, wait for a minimum
of 15 minutes, then make sure that the heatsink is cool before you replace the cooling fans. If you touch a hot
drive heatsink, it can burn you.
WARNING
Electrical Shock Hazard. Only let approved personnel install, wire, maintain, examine,
replace parts, and repair the drive. If personnel are not approved, it can cause serious injury or death.
WARNING
Sudden Movement Hazard. Tighten the screws to the specified tightening torque.
Incorrect tightening torques can cause damage to equipment and cause serious injury or death from falling
equipment.
NOTICE
Damage to Equipment. When you touch the drive and circuit boards, make sure that you
observe correct electrostatic discharge (ESD) procedures. If you do not follow procedures, it can cause ESD
damage to the drive circuitry.
3
Overview
Use this option to attach an LCD keypad and a communication option to the drive.
You can use this option when the installation environment of the drive meets the specifications
shown in
Installation Environment on page 5
◆
Compatible Products
This installation kit is compatible with these drives:
•
GA500
◆
Installation Environment
The installation environment is important for the lifespan of the product and to make sure that
the drive performance is correct. Make sure that the installation environment agrees with these
specifications.
Environment
Conditions
Area of Use
Indoors
Power Supply
Overvoltage Category III (IEC60664)
