YASKAWA JZSP-GA500, Руководство по установке, Страница: 14 / 28

5 Installation Procedure
14 YASKAWA TOEP C720600 05B LCD Keypad Attachment Installation Manual
Note:
Four different ground wires are packaged with the option. The length and the terminal size on the drive side of
the ground wire are different for different drives. Use the correct ground wire for your drive. Refer to
Table 5.1
for ground wire selection.
A - Communication option side of the
ground wire
B - Drive side of the ground wire
C - Ground terminal
D - Ground wire
Figure 5.9 Connect the Ground Wire
Table 5.1 Ground Wire Length
Drive Model
Length
mm
Three-Phase 200 V
Class
Single-Phase 200 V
Class
Three-Phase 400 V
Class
- - - 150
2001, 2002, 2004, 2006,
2008, 2010, 2012, 2018,
2021
B001, B002, B004,
B006, B010, B012, B018 4001, 4002, 4004, 4005,
4007, 4009, 4012
200
2030, 2042 - 4018, 4023 250
2056, 2070, 2082 - 4031, 4038, 4044, 4060 400
4.
Use the supplied screw A to attach a communication option and an Insulator to the
base.
Tighten the screws to a correct tightening torque:
• 3
×
8 tapping screw: 0.49 N
∙
m to 0.73 N
∙
m (4.34 in
∙
lb to 6.46 in
∙
lb)
A - Base
B - Insulator
C - Communication option
D - Screw A
Figure 5.10 Install the Communication Option