background image

Published in Germany   June 2013

MANUAL NO.  TOEP C710606 75B  

YASKAWA EUROPE GmbH

In the event that the end user of this product is to be the military and said product is to be employed in any weapons systems or the manufacture 
thereof, the export will fall under the relevant regulations as stipulated in the Foreign Exchange and Foreign Trade Regulations.  Therefore, be sure 
to follow all procedures and submit all relevant documentation according to any and all rules, regulations and laws that may apply.

Specifications are subject to change without notice for ongoing product modifications and improvements.

©

 2013 YASKAWA EUROPE GmbH. All rights reserved.

EUROPEAN HEADQUARTERS
YASKAWA EUROPE GmbH

Hauptstra

β

e 185, 65760 Eschborn, Germany

Phone: +49 (0)6196 569 300     Fax: +49 (0)6196 569 398
E-mail: [email protected]    Internet: http://www.yaskawa.eu.com

U.S.A.
YASKAWA AMERICA, INC.

2121 Norman Drive South, Waukegan, IL 60085, U.S.A.
Phone: +1 847 887 7000     Fax: +1 847 887 7370
Internet: http://www.yaskawa.com

JAPAN
YASKAWA ELECTRIC CORPORATION

New Pier Takeshiba South Tower, 1-16-1, Kaigan, Minatoku, Tokyo, 105-0022, Japan 
Phone: +81 (0)3 5402 4511     Fax: +81 (0)3 5402 4580
Internet: http://www.yaskawa.co.jp

YASKAWA AC Drive V1000

IP66 Type

Compact Vector Control Drive

Quick Start Guide

2  -0

Содержание CIMR-VC*****H**-00 series

































Отзывы: