6 Parameter Table
EN 24
YASKAWA Europe
TOEP C710606 75B - AC Drive V1000 IP66 - Quick Start Guide
U1-24
Pulse Input frequency
Fault Trace
U2-01
Current Fault
U2-02
Previous Fault
U2-03
Frequency Reference at Previous Fault
U2-04
Output Frequency at Previous Fault
U2-05
Output Current at Previous Fault
U2-06
Motor Speed at Previous Fault
U2-07
Output Voltage at Previous Fault
U2-08
DC Bus Voltage at Previous Fault
U2-09
Output Power at Previous Fault
U2-10
Torque Reference at Previous Fault
U2-11
Input Terminal Status at Previous Fault
U2-12
Output Terminal Status at Previous Fault
U2-13
Drive Operation Status at Previous Fault
U2-14
Cumulative Operation Time at Previous Fault
U2-15
Soft-Starter Speed Reference at Previous Fault
U2-16
Motor q-Axis Current at Previous Fault
U2-17
Motor d-Axis Current at Previous Fault
Fault History
U3-01
to
U3-04
Lists the most recent fault that occurred through the fourth most
recent fault.
U3-05
to
U3-08
Accumulated operation time at the most recent fault through the
fourth most recent fault.
U3-09 to
U3-14
Lists the fifth most recent fault that occurred through the tenth most
recent fault.
U3-15 to
U3-20
Accumulated operation time at fifth most recent fault through the
tenth most recent fault.
* The following faults are not recorded in the error log:
CPF00, 01, 02, 03, UV1, and UV2.
DI/DO
Sel.
Description
Digital Input Function Selections
3
Multi-step speed reference 1
4
Multi-step speed reference 2
5
Multi-step speed reference 3
6
Jog frequency command (higher priority than multi-step speed
reference)
7
Accel/decel time selection 1
F
Not used (Set when a terminal is not used)
14
Fault reset (Reset when turned ON)
20 to 2F
External fault; Input mode: N.O. contact / N.C. contact, Detection
mode: Normal/during operation
Digital Output Function Selections
0
During Run (ON: run command is ON or voltage is being output)
1
Zero Speed
2
Speed Agree
6
Drive Ready
E
Fault
F
Not used
10
Minor fault (Alarm) (ON: Alarm displayed)
Monitor
Description
