YASKAWA CIMR-V7xx20P1 series, Руководство по установке

Страница: 16 / 64

16
Location of the Drive is important to achieve proper performance and normal operating life. The unit should be installed in an
area where it will be protected from:
• Extreme cold and heat. Use only within the ambient temperature range (for open chassis
type): 14 to 122°F (-10 to +50°C) (for enclosed wall mount type): 14 to 104°F (10 to +40°C)
• Rain, moisture
• Oil sprays, splashes
• Salt spray
• Direct sunlight. (Avoid using outdoors)
• Corrosive gases (e.g. sulfurized gas) or liquids
• Dust or metallic particles in the air
• Physical shock, vibration
• Magnetic noise (Example: welding machines, power devices, etc.)
• High humidity
• Radioactive substances
• Combustibles: thinner, solvents, etc.
When preparing to mount the Drive, lift it by its base, never by the front cover. For effective cooling, as well as proper mainte-
nance, the Drive must be installed on a flat, non-flammable vertical surface (wall or panel) using recommended mounting
screws. There MUST be a MINIMUM 3.9 in. clearance above and below the Drive to allow air flow over the heat sink fins.
A minimum 1.2 in. clearance is required on each side of the Drive.
Mounting
Precautions
Section 3
IG.V7.01_new format.qxd 4/18/05 1:21 PM Page 16