YASKAWA 1000-Series, Руководство по установке

Страница: 23 / 30

YASKAWA ELECTRIC TOBP C730600 41E 1000-Series Option DO-A3 Installation Manual 23
6 Related Parameters
6 Related Parameters
The parameters outlined in the following sections are used to set up the unit for operation
with the option. Set parameters as needed. Parameter setting methods can be found in the
drive unit Instruction Manual.
◆
Parameter F5-09
Set parameter F5-09 to select the option output mode.
Table 5 shows the changes in the output terminal contents according to the output mode set
in F5-09.
Table 5 F5-09 and Output Mode
Table 6 Binary Coded Output (F5-09 = 1)
Terminal
Block
Terminal
F5-09 = 0
Individual Output
(Default when Installed to
Drive)
F5-09 = 1
Binary Code Output
F5-09 = 2
Multi-Function Output
(Default when Installed
to D1000)
TB1
M1-M2 Zero speed During run Determined by F5-07
M3-M4 Speed agree Alarm (excluding bb) Determined by F5-08
TB2
P1-PC oC, GF (Overcurrent)
Binary code output
(Refer to
Table 6 )
Determined by F5-01
P2-PC ov (Overvoltage) Determined by F5-02
P3-PC
oH2 (Unit overheat)
or oL2 (overload)
Determined by F5-03
P4-PC Not used Determined by F5-04
P5-PC oS (Overspeed) Zero speed Determined by F5-05
P6-PC
oH, oH1 (Unit overheat)
or oL1 (Overload)
Speed agree Determined by F5-06
Coded Output Description
TB2
P1-PC P2-PC P3-PC P4-PC
0 Normal operation (no fault) 0 0 0 0
1 oC, GF (Overcurrent) 1 0 0 0
2 ov (Overvoltage) 0 1 0 0
3 oL2 (Unit overload) 1 1 0 0
4 oH, oH1 (Unit overheat) 0 0 1 0
5 oS (Overspeed) 1 0 1 0
6 Not used 0 1 1 0
7 rr, rH (Braking resistor overheat) 1 1 1 0
8 EF1 to EF12 (External fault) 0 0 0 1