background image

14

15

model no. 

060-3775-4

  |  contact us: 1.866.523.5218

model no. 

060-3775-4

  |  contact us: 1.866.523.5218 

Fig. 7

Oper

ation

!

 

WARNING: 

Do not allow familiarity with products to make you 

careless. Remember that a careless fraction of a second 

is sufficient to inflict serious injury.
Always wear eye protection with side shields marked to 

comply with ANSI Z87.1, along with hearing protection. 

Failure to do so could result in objects being thrown into 

your eyes, resulting in possible serious injury.
Do not use any attachments or accessories not 

recommended by the manufacturer of this product. The 

use of attachments or accessories not recommended can 

result in serious personal injury.

NOTE: Use only an approved outdoor extension cord as 

described previously in this manual.

APPLICATIONS
You may use this product for the purposes listed below:
• 

Clearing leaves and other yard debris from your lawn.

• 

Keeping decks, patios, garages and driveways free from leaves, pine needles and 

other debris.

STARTING / STOPPING THE BLOWER 
• 

Lock up vacuum gate.

• 

Attach the outlet end of an extension cord to the plug on the rear of the blower.

• 

Route the extension cord through the side of the loop located on the rear of the 

blower housing and place underneath the cord retainer. (Fig. 7)

A

Cord retainer

B

Loop  

C

Plug 

D

Extension cord  

A

C

B

D

OPERATING THE BLOWER
• 

To keep from scattering debris, blow around the outer edges of a debris pile. Never 

blow directly into the centre of a pile.

• 

To reduce sound levels, limit the number of pieces of equipment used at any one 

time.

• 

Use rakes and brooms to loosen debris before blowing. In dusty conditions, slightly 

dampen surfaces when water is available.

• 

Watch out for children, pets, open windows, or freshly washed cars, and blow 

debris safely away.

• 

During operation, hold the device with one hand on the casing grip and the other on 

the additional grip.   (Fig. 9)

• 

Operate power equipment at reasonable hours only – not early in the morning or 

late at night when people might be disturbed. Comply with the times listed in local 

ordinances.

• 

After using blowers or other equipment, CLEAN UP! Dispose of debris properly.

• 

To start the blower, place the power switch on I (Low Speed) or II (High Speed) 

position.

• 

To stop the blower, place the power switch in 0 (OFF) position. (Fig. 8)

Fig. 8

0: OFF 

I: Low Speed 

II: High Speed 

Oper

ation

!

 

WARNING:

 The leaf blower draws in additional air 

from these opening amplifying the air volume. Do not 

cover, block or insert any object in these openings.

Содержание AERO FORCE 060-3775-4













Отзывы: