4
5
model no.
060-3775-4
| contact us: 1.866.523.5218
model no.
060-3775-4
| contact us: 1.866.523.5218
•
Do not force tool. Use the correct tool for your application. The correct tool will do
the job better and safer at the rate for which it is designed.
•
Do not use on steps, a ladder, roof top, tree, or other unstable support. Stable
footing on a solid surface enables better control of the blower in unexpected
situations.
•
Keep firm footing and balance. Do not overreach. Overreaching can result in loss of
balance.
•
Do not allow to be used as a toy. Close attention is necessary when used by or near
children.
•
Avoid accidental starting. Be sure the power switch is not on before plugging in.
•
Do not leave the tool when plugged in. Unplug from the power outlet when not
in use, before servicing, and before storing the tool. Turn off all controls before
unplugging. Such preventative safety measures reduce the risk of starting the tool
accidentally.
•
Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled
with the switch is dangerous and must be repaired.
•
Do not use with damaged plug. If tool is not working as it should or has been
dropped, damaged, left outdoors, or dropped into water, take it to a qualified service
dealer for inspection and possible repair.
•
Keep all bystanders, children, and pets at least 50’ (15.24 m) away.
•
Do not operate this unit when you are tired, ill, upset or under the influence of
alcohol, drugs, or medication.
•
Do not operate in poor lighting.
•
Do not put any object into openings. Do not use with any opening blocked; keep
openings free of dust, lint, hair, and anything that may reduce air flow.
•
Check the work area before each use. Remove all objects such as rocks, broken
glass, nails, wire, or string which can be thrown or become entangled in the
machine.
•
Never use blower near fires, fireplaces, hot ashes, barbecue pits, etc., which may
cause fire to spread.
•
Do not pull or carry by cord, use cord as a handle, close a door on a cord, or pull
cord around sharp edges or corners. Do not run appliance over cord. Keep cord
away from heated surfaces.
•
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
•
Use only identical manufacturer’s replacement parts and accessories. Use of any
other parts may create a hazard or cause product damage.
•
In a double insulated appliance, two systems of insulation are provided instead
of grounding. No grounding means is provided on a double insulated appliance,
nor should a means for grounding be added to the appliance. Servicing a double
insulated appliance requires extreme care and knowledge of the system and
should be done only by qualified service personnel. Replacement parts for a double
insulated appliance must be identical to the parts they replace.
•
For household use only.
•
Make sure your extension cord is in good condition. When using an extension cord,
be sure to use one heavy enough to carry the current your product will draw. A wire
gauge size (A.W.G.) of at least 14 is recommended for an extension cord 50’ (15.24
m) or less in length. If in doubt, use the next heavier gauge. The smaller the gauge
number, the heavier the cord. An undersized cord will cause a drop in line voltage
resulting in loss of power and overheating.
•
Do not point the blower nozzle in the direction of people or pets.
•
Never place blower on any surface, except a hard, clean surface, when motor is
running. Gravel, sand, and other debris can be picked up by the air inlet and thrown
at the operator or bystanders, causing possible serious injuries.
•
Never run the unit without the proper equipment attached. Always ensure the blower
tubes are installed.
•
When not in use, blower should be stored indoors in a dry, locked-up place, out of
the reach of children.
•
Maintain tool with care. Keep fan area clean for best and safest performance.
Follow instructions for proper maintenance.
•
Do not attempt to clear clogs from tool without first unplugging it.
•
Do not pull or carry by cord, use cord as a handle, or pull cord around sharp edges
or corners. Keep cord away from heated surfaces.
•
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
•
If the power supply cord is damaged, stop using the unit. Take the unit to a qualified
service dealer for inspection and possible repair.
•
Save these instructions. Refer to them frequently and use them to instruct others
who may use this power tool. If you loan someone this power tool, loan them these
instructions also.
Specific Saf
ety Rules
Important Saf
ety Instructions