10
11
model no.
060-3775-4
| contact us: 1.866.523.5218
model no.
060-3775-4
| contact us: 1.866.523.5218
!
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Use of this
product with damaged or missing parts could result in
serious personal injury.
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to
possible serious personal injury.
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.
!
WARNING:
Do not use this product if any parts
on the Packing List are already assembled to your
product when you unpack it. Parts on this list are not
assembled to the product by the manufacturer and
require customer installation. Use of a product that
may have been improperly assembled could result in
serious personal injury.
UNPACKING
This product requires assembly.
•
Carefully remove the product and any accessories from the box. Make sure that all
items listed in the packing list are included.
•
Inspect the product carefully to make sure no breakage or damage occurred during
shipping.
•
Do not discard the packing material until you have carefully inspected and
satisfactorily operated the product.
•
If any parts are damaged or missing, do not operate the blower. Return it for
replacement to the retailer from which it was purchased.
PACKING LIST
Blower / Vaccum
AERO FORCE™ amplifying tube connector
Vacuum tubes
AERO FORCE™ amplifying tube
Collection bag
Screws (4 pcs)
Operator’s manual
A
ssembl
y
A
ssembl
y
ASSEMBLING THE AERO FORCE™ AMPLIFYING TUBE
•
Connect
AERO FORCE™
amplifying tube to
AERO FORCE™
amplifying tube
connector by screws.
•
Slide
AERO FORCE™
amplifying tube connector forward until the tab on the blower
housing clicks into the slots on the tube. (Fig. 1)
INSTALLING VACUUM TUBE AND COLLECTION BAG WITH SHOULDER STRAP
•
Assemble the vacuum tube sections by aligning and sliding upper tube into the
lower vacuum tube until the different size tabs have "set".
•
Turn on the trigger switch and open vacuum gate. (Fig. 2)
A
Slot
B
Tube opening
C
AERO FORCE™ amplifying tube connector
D
AERO FORCE™ amplifying tube
A
B
C
D
Open
Fig. 1
Fig. 2
11
Step 1
Step 2
Step 3