model no. 060-2370-2 | contact us: 1.866.523.5218
16
Oper
ation
CHARGING PROCEDURE
•
plug the charger into an AC power outlet.
•
insert the battery pack (1) into the charger (2).
This is a diagnostic charger. The Charger LED Lights (3) will illuminate in specific order to
communicate the current battery status. They are as follows:
3
1
2
BATTERY iS CHARGiNG:
FULLY CHARGED:
BATTERY iS TOO WARm:
(REmOVE FOR AppROX. 30
miNUTES TO ALLOW TO COOL)
DEFECTiVE BATTERY:
(REmOVE AND REpLACE WiTH
NEW BATTERY iF THiS OCCURS)
NO BATTERY pRESENT
RED
RED
GREEN
ORANGE
OFF
RED
RED
RED
RED
BLiNKiNG
RED
BLiNKiNG
1
2
3
CHECKING THE CHARGE
if the battery pack does not charge properly:
•
Check the current at the power outlet with another tool. make sure that the outlet is not turned
off.
•
Check that the charger contacts have not been shorted by debris or foreign material.
•
if the surrounding air temperature is not normal room temperature, move the charger and
battery pack to a location where the temperature is between 7 °C (45 °F) and 40° C (104 °F).
!
NOTE: The battery is not shipped fully charged. It is
recommended to fully charge before first use to ensure
that maximum run time can be achieved. This lithium-
ion battery will not develop a memory and may be
charged at any time. A fully discharged battery pack will
require approximately 60 minutes to fully charge from a
discharged state.
CHARGING PROCEDURE (LED INDICATOR)
