model no.
060-1314-4
| contact us: 1.866.523.5218
model no.
060-1314-4
| contact us: 1.866.523.5218
30
CONTRO
lS
WARNING: If snow clogs the discharge chute do not try to remove it
before:
–
Releasing the auger control handle.
–
Stopping the engine.
–
Disconnecting the cable from the spark plug.
Do not put your hand inside the chute or auger. Use the chute clearing
tool included with your snowblower.
CHANGe DISCHARGe DIReCTION:
1. Move the discharge chute rotation lever either left or right.
CHANGe DISCHARGe HeIGHT:
1. Discharge chute deflector lever controls the deflector up or down.
ADJUSTING THe SNOW SHOeS
–
Tilt the snowblower auger back and place a spacer under the shave plate below the
augers that is the height that you want the shave plate to ride above the ground.
–
Loosen the bolts holding the skid shoes in place and slide the skid shoes down until
they contacts the ground.
–
Re-tighten the skid shoe bolts.
