background image

21

PARTS LIST

20

MANUFACTURER’S LIMITED WARRANTY FOR:

The limited warranty set forth below is given by MTD 
LLC (“MTD”) with respect to new merchandise purchased and
used in the United States and Canada, its possessions and
territories.

MTD warrants this product against defects in material and
workmanship for a period of two (2) years commencing on the
date of original purchase and will, at its option, repair or
replace, free of charge, any part found to be defective in
material or workmanship. This limited warranty shall only
apply if this product has been operated and maintained in
accordance with the Operator’s Manual furnished with  the
product, and has not 

been subject to misuse,

abuse,

commercial use, neglect, accident, improper

maintenance, alteration, vandalism, theft, fire, water or
damage because of other peril or natural disaster. Damage
resulting from the installation or use of any accessory or
attachment not approved by MTD for use with the product(s)
covered by this manual will void your warranty as to any
resulting damage. This warranty is limited to ninety (90) days
from the date of original retail purchase for any MTD product
that is used for rental or commercial purposes, or any other
income-producing purpose.

HOW TO OBTAIN SERVICE: Warranty service is available,
WITH PROOF OF PURCHASE THROUGH YOUR LOCAL
AUTHORIZED SERVICE DEALER. To locate the dealer in your
area, please check for a listing in the Yellow Pages or contact
the Customer Service Department of MTD LLC by calling 
1-866-747-9816 or writing to P.O. Box 361131, Cleveland
OH 44136-0019 or if in Canada call 1-800-668-1238. No
product returned directly to the factory will be accepted
unless prior written permission has been extended by the
Customer Service Department of MTD LLC.

This limited warranty does not provide coverage in the 
following cases:

A. Guide ,Bar ,Chain.

B. MTD does not extend any warranty for products sold or

exported outside of the United States of America and
Canada, its possessions and territories, except those
sold through MTD’s authorized channels of export
distribution.

MTD reserves the right to change or improve the design of
any MTD Product without assuming any obligation to
modify any product previously manufactured.

No implied warranty, including any implied warranty of
merchantability or fitness for a particular purpose,
applies after the applicable period of express written
warranty above as to the parts as identified. No other
express warranty or guaranty, whether written or oral,
except as mentioned above, given by any person or
entity, including a dealer or retailer, with respect to any
product shall bind MTD. During the period of the
Warranty, the exclusive remedy is repair or replacement
of the product as set forth above. 
(Some states do not
allow limitations on how long an implied warranty lasts, so
the above limitation may not apply to you.)

The provisions as set forth in this Warranty provide the
sole and exclusive remedy arising from the sales. MTD
shall not be liable for incidental or consequential loss or
damages including, without limitation, expenses
incurred for substitute or replacement lawn care
services, for transportation or for related expenses, or
for rental expenses to temporarily replace a warranted
product. 
(Some states do not allow limitations on how long
an implied warranty lasts, so the above limitation may not
apply to you.)

In no event shall recovery of any kind be greater than the
amount of the purchase price of the product sold. Alteration
of the safety features of the product shall void this
Warranty. You assume the risk and liability for loss,
damage, or injury to you and your property and/or to others
and their property arising out of the use or misuse or
inability to use the product.

This limited warranty shall not extend to anyone other than
the original purchaser, original lessee or the person for
whom it was purchased as a gift.

How State Law Relates to this Warranty: This warranty
gives you specific legal rights, and you may also have other
rights which vary from state to state.

To locate your nearest service dealer dial 1-866-747-9816
in the United States or 1-800-668-1238 in Canada.

MTD LLC

P.O. Box 361131
Cleveland, OH 44136-0019

 No. 

 Parts No.

Description

 No. 

 Parts No.

Description

1

6228-211403

HOUSING (R)

35

6024-211507

SPRING

2

6228-211504

CHAIN COVER ASS'Y

36

6SQABB04-20

SCREW

3

6012-210501

WASHER

37

6181-211501

CLUTCH

4

6017-210103

OIL COVER

38

6181-211502

CLUTCH

5

6SDABB04-18

SCREW

39

6024-211503

SPRING

6

6043-211302

ADJUSTMENT PLATE

40

6014-211501

WASHER

7

6050-211301

OIL WASHER

41

6154-211301

CONNECTING BAR

8

6220-210201

CHAIN

42

6SQABB4.5-30

SCREW

9

6038-211505

HOUSING (R)

43

6154-211504

CONNECTOR

10

9040-3101124

BAR

44

6017-211503

FRONT-HAND GUARD

12

6228-211506

OIL PIPE ASS'Y

45

6228-211303

FIXED ASS'Y

13

6076-210503

WASHER

46

6SDABB04-16

SCREW

14

6056-211502

SWITCH BUTTON

47

6079-211503

SPRING

15

6066-211501

OIL TANK

48

6038-211506

HOUSING (L)

16

6028-211502

TRIGGER

49

6086-211501

REAL COVER

17

6022-211502

SWITCH  

50

6228-211301

MOTOR GEAR BOX ASS'Y

18

6024-211301

SPRING

51

6022-211501

SWITCH

19

6CY-08

RING

52

6SDABB04-10

SCREW

20

6079-211501

SPRING, BRAKE

53

6011-211502

POWER CORD

21

6073-211501

GEAR

54

6043-840001

STRAIN RELIEF

22

6059-210201

ADJUSTMENT COVER

55

6059-855001

CORD GUARD

23

6115-211502

PIN

56

6012-211501

RUBBER STOP

24

6154-211502

CONNECTION

57

6024-211506

SPRING

25

6CG-9.5

C RING

58

6PC05-14.7

PIN

26

6014-210502

WASHER

59

6PC4.4-35

PIN

27

6228-210104

GEAR BEARING ASS'Y

60

6SQAB-04-06

SCREW

28

6077-211501

COVER

61

6WFB-03-12

WASHER

29

6057-210102

WASHER

62

6SDABB03-15

SCREW

30

6CC-10

C RING

63

6158-211502

PLATE

31

6SDABB03-18

SCREW

64

6SLABB03-06

SCREW

32

6228-210105

OIL PUMP ASS'Y

65

6010-211301

WIRE

33

6188-211501

PULL BAR

66

6SDABB04-14

SCREW

34

6114-211501

PULL PLATE

67

6124-TH0101

SLEEVE

              

Содержание MTD1416NT

































































Отзывы: