24
OPERATION
WARNING:
Never reach into the discharge chute or place any body part in front of the snow blower
when the unit is operating or when the battery pack(s) are installed. Always ensure all moving parts
have stopped and the battery pack(s) have been removed before clearing any obstructions. Failure
to follow these instructions can result in serious personal injury.
• Take notice of the direction of the wind before beginning. When possible, discharge snow in the same
direction as the wind to prevent snow from being thrown back into your face.
• Some parts of the snow blower can freeze under extreme weather conditions. Do not attempt to operate
the unit with frozen parts.
• When finished, allow the motor to run for an additional few minutes to prevent moving parts from
freezing, then turn the chute rotation handle back and forth several times to free it from any ice buildup.
Make sure to clean off any snow and ice from the product.
• In snowy and cold conditions, some controls and moving parts may freeze. Do not use excessive
force when trying to operate frozen controls. If you have difficulty operating any control or part, start
the machine as “
STARTING/STOPING THE SNOW BLOWER
” section shown and let it run for a few
minutes.