13
ASSEMBLY
2. Attach the auger drive control cable to the cable clamp located on the belt cover (see Fig. 4).
Fig. 4
TO ASSEMBLE THE SPEED SHIFT ROD (See Fig. 5&6)
1. Remove the cotter pin from the bottom plate of the speed shift handle. (Fig. 5)
2. Attach the upper end of shift rod to the pin on the bottom plate of the speed shift handle and
secure it in place with the cotter pin.
3. Remove the cotter pin from the other end of shift rod and insert the angled end into the hole
on the shift lever , and secure it in place with the cotter pin. (Fig. 6)
Fig. 5
Fig. 6
TO ASSEMBLE THE CONTROL HANDLE GRIP (See Fig. 7)
Rotate the control handle grips to the handle ends on the dash panel. Tighten each by hand.
Fig. 7
