17
4. Insert the other battery pack into the other battery compartment in the same way.
5. To remove the battery pack, depress the battery release latch to release the battery pack, and then lift it
out of the compartment (Fig. 19).
6. Close the battery cover.
Fig. 19
NOTICE:
Make sure that the latch on the snow blower snaps into place and that the battery pack(s)
are secured to the unit before starting operation.
STARTING/STOPPING THE SNOW BLOWER
CAUTION:
Do not attempt to override the operation of the safety button. Do not rapidly turn the
snow blower off and on.
WARNING:
The operation of a snow blower can result in foreign objects being thrown into your or
others’ eyes, which can damage eyes severely. Always wear safety glasses while operating the snow
blower or while performing any adjustments or repairs on the snow blower.
WARNING:
Ensure that other people and pets remain at least 100’ (30m) away from the snow blower
when it is in use.
WARNING:
The auger will continue to rotate for a few seconds after the snow blower is turned off.
Allow the auger to stop rotating before starting it again.
To Start the Snow Blower
1. Ensure that the handle assembly is securely attached, the chute assembly is mounted properly, and the
chute and chute deflector are adjusted to an appropriate position.
2. Insert the battery pack(s) to the battery compartments and close the battery cover.
NOTICE:
Make sure that the latch on the snow blower "clicks" into place and that the battery
pack(s) are secured to the snow blower before operation.
3. Set the on/off switch to the "on" position. (Fig. 20).
4. Squeeze the auger control trigger against the grip to start snow blowing. (Fig. 21)
NOTICE:
The snow blower may not properly start if its battery temperature is -4°F (-20°C) or less.
If the snow blower doesn’t start, remove the battery from the snow blower and allow it to warm
indoors for 10 minutes or longer. Reinstall the battery and try again.
OPERATION
