22
Fig 9
Low speed
Three-speed adjustable knob
As shown in Fig 9
The knob can be set at three position for selecting different speed.
Detail setting see below line draw.
Medium speed
High speed
Cutting
As shown in
Fig 10-13
Note:
During cutting work, ensure that no contact is made with objects, such as
wire fencing or main plant stems. This may result in damage to the cutter bar.
Note:
Switch off the equipment immediately in the event that the blades are blocked
by solid objects, remove the battery pack then remove the object.
Note:
Avoid overstraining the equipment during work.
1. Hold the hedge trimmer away from yourself using both hands. Stand in a secure and
stable position.
2. Switch on the unit
3.
Move forwards gradually in a smooth action to ensure even cut. The two-sided blades
cut in both direction, or you may swing from side to side.
Note :
The appliance cuts branches of maximum thickness 20 mm.
OPERATION
Содержание LH G51A
Страница 2: ......
Страница 4: ...1 Fig 1 1 2 3 4 5 9 7 6 8 Fig 2 13 14 15 16 10 11 12 DESCRIPTION OF PRODUCT PARTS ...