![background image](http://html1.mh-extra.com/html/yard-force/ar-re01/ar-re01_original-instructions-manual_905851004.webp)
6
7
WIFI REPEATER
Log In
1. The login screen below will
appear. Enter the username
and password, then click
"Submit" to login. The default
user name is "admin" and
password is "admin".
2. After logging in, you will see
the web page below. Click on
“Repeater” to continue.
3. Select your house router
Wireless SSID to continue
4. When you see below screen,
please do not change default
SSID "WiFi-Repeater". Kindly
do not change any setting,
except entering the password
of your home WiFi network.
5. Click the "Apply" button and
the repeater will restart. Wait
for a few seconds until your
WiFi- Repeater is ready for
use.
WIFI REPEATER
2. Open you phone browser
and enter the IP address
: http: //192.168.10.1 into
browser address box.
Configure Via Computer
1. Click on the nextwork icon
on the right bottom of
your desktop. You will find
the signal from the WiFi-
Repeater. Click on “Connect”
and wait for a few seconds.
2. Open web browser and
type http://192.168.10.1 in
the browser’s address box.
This number is the default IP
address for this device
NOTE
: Please check whether the Yard Force Wi-Fi -Repeater is in
line with factory default settings stated in the manual. The Wi-Fi –
Repeater and your home Wi-Fi router should be connected to the
following channel http://192.168.10.1. If you still have a problem,
or need to change your house router, you can reset the Wi-Fi
-Repeater by pressing the reset button for 10 seconds, switch the
power supply off and then switch on again.
GB